H2OHealth Tap Filter Original

No smart screens. No batteries. No complexity. Just clean, filtered water in 2 minutes.

The H2OHealth Tap Filter Original uses 7 stages of filtration — including a washable ceramic dome you can visually inspect through the clear housing. When it starts to darken, rinse it off and keep going. No guessing. No app. Just honest filtration that you can see working.

It clips directly onto your existing tap with no plumbing, no drilling and no permanent changes — ideal for renters, students and anyone who just wants better water without the hassle. Take it with you when you move.

The most straightforward water upgrade you'll ever make. Backed by a 90-day money-back guarantee.

See exactly what your tap water leaves behind.

Australian tap water meets government standards. But “safe” isn’t the same as clean.

Chlorine. Fluoride. Heavy metals. Microplastics. PFAS — the “forever chemicals” now detected in water supplies across Queensland, NSW and Victoria. Your council says it’s fine. But every glass still carries treatment byproducts, pipe residue and chemical traces that no regulation fully eliminates.

Most filters work silently — you swap the cartridge on a schedule and hope for the best. The H2OHealth Original does something different: the clear housing lets you watch the ceramic dome absorb contaminants over time. When it starts to discolour, rinse it under the tap and keep going. Washable. Reusable. Honest.

No LED. No app. Just a filter you can trust because you can see it working.

$99.95 once. Clean water for up to a year.

Under-sink systems cost $500–$2,000 and need a plumber. Bottled water costs the average Aussie household over $700 a year — before you even count the plastic guilt.

The H2OHealth Tap Filter Original gives you genuinely filtered tap water for less than $100, with no installation fees, no ongoing subscription and no plastic waste. Each cartridge lasts up to 12 months and covers around 4,000 litres. Replacements start from $29.95 — that’s cleaner water at around $0.007 per litre.

Sometimes the simple option is the smartest one.

Better water makes everything taste better.

Your morning coffee. A pot of pasta. A glass of water at 11pm. Whatever you’re making, it starts with what comes out of your tap. Filtered, pH-balanced water removes the metallic edge and chlorine aftertaste that dulls flavour — leaving water that’s crisp, clean and naturally refreshing.

Small upgrade. Noticeable difference, every single day.

What gets filtered out

The H2OHealth Original’s 7-stage filtration targets the most common contaminants found in Australian tap water:

• Chlorine & chloramines — added during treatment, responsible for that chemical taste and smell
• Heavy metals — lead, mercury and copper that leach from ageing pipes
• Fluoride — reduced through the ceramic filtration stage
• Microplastics — found in over 95% of tap water samples tested globally
• Sediment & rust — particles from old infrastructure
• Bacteria — captured and neutralised by the ceramic dome layer
• Volatile organic compounds (VOCs) — pesticide and herbicide residue

Essential minerals like calcium and magnesium are retained, so your water stays balanced and healthy.

3-minute setup — no tools, no plumber

Step 1 — Unbox & prep
Remove from packaging. Open the filter housing, remove the filter wrapper and replace the housing. Unscrew your existing tap aerator.

Step 2 — Attach to your tap
Find the matching adapter from the included set and screw it onto your tap. Slide the locking nut over the spout, align the filter base thread with the adapter, and screw down firmly.

Step 3 — Run & enjoy
Turn on the tap and switch to filtered mode. Run cold water for 2 minutes to flush and prime the filter. That’s it — your H2OHealth system is live.

Unsure if it fits your tap? Send us a photo and we’ll confirm compatibility before you order.

What our customers say

“You can literally see the filter change colour as it works. That was enough to sell me.”
— Barb ★★★★★

“I feel better drinking this water. Sounds strange but try it and see.”
— Simmon ★★★★★

“Less joint stiffness and I’m genuinely drinking more water every day.”
— Jon ★★★★★

Frequently asked questions

Will it fit my tap?
Yes — the Original comes with multiple adapters to suit most standard Australian kitchen taps. If you’re unsure, send us a photo of your tap and we’ll confirm before you order.

Is it suitable for renters?
Absolutely. No permanent changes, no drilling, no damage to your tap. Detach it and take it with you when you move.

How often do I replace the cartridge?
Every 3–12 months depending on usage and local water quality — typically around 4,000 litres per cartridge. The visible ceramic dome will start to discolour when it needs a wash, and eventually when it’s time to replace the cartridge altogether.

How do I clean the ceramic dome?
Remove the dome from the filter housing, scrub gently with a soft brush or scourer under running water, and replace. You can do this multiple times before needing a new cartridge.

Will it affect my water pressure?
No. The filter is designed to maintain consistent flow while delivering full filtration performance.

What’s in the box?
H2OHealth Tap Filter Original · 1 filtration cartridge · 5 tap adapters · Seal ring · Owner’s manual

Shipping & warranty
Ships Australia-wide via Australia Post from our warehouse in Sydney. Delivery in 3–11 business days. Covered by a 1-year warranty against manufacturing defects and a 90-day money-back satisfaction guarantee.